Cleanroom injection molding: how it differs from a standard molding shop

Published
Updated

Blue Sumitomo (SHI) Demag SE180EV-A injection molding machine

Ordinary injection molding happens on an open factory floor. Medical device parts that touch patients or specimens need a space where dust and contaminants are controlled: a cleanroom. These are the main differences.

1. Filtered air with a measurable particle count

Air enters through HEPA filters, and the room is classified by how many particles its air holds. Class 1000 means no more than 1,000 particles of 0.5 µm and larger per cubic foot of air, and Class 10000 no more than 10,000, while ordinary room air holds about 1,000,000. The current standard, ISO 14644-1, calls these two levels ISO Class 6 and ISO Class 7.

2. Higher pressure than outside

A cleanroom keeps its air pressure slightly above the surrounding areas. When a door opens, air flows out rather than in, so outside dust has a hard time getting in.

3. People change clothes to enter

People are the biggest source of dust and fibers on a production floor. Before entering, staff put on coveralls, hoods, masks and gloves in a set sequence.

4. Everything brought in is cleaned

Resin, molds and tools are cleaned before they go in, and they usually pass through a pass box rather than being carried in.

5. All-electric molding machines

All-electric machines are driven by servo motors and have no hydraulic oil system that could leak or form a mist, which is why cleanrooms favor them. One example is the Sumitomo (SHI) Demag SE180EV-A we use, with about 180 tons of clamping force.

6. Packed before leaving the room

Parts are usually packed inside the cleanroom before they leave, so they stay clean through handling and shipping.

Which parts should be molded in a cleanroom

Parts that touch the body, specimens or drugs, such as specimen collection tubes and laboratory ware, and any job where the customer or a product standard sets a cleanliness level. If you are not sure, send us your drawings and our sales team will help you assess them.

Talk to our sales team

Ask about injection molding, request a quotation or order products. We reply Monday to Friday, 08:00–17:00 (GMT+7).